Leonard Industries

MOD-S MOD-S
MOD-S MOD-S

Function

Complete plaster fabrication station

The MOD-S is the ultimate plaster room work station. The MOD-S is an LI WB-1000 with two CX-500s mounted to the wings. The MOD-S holds four cast at a time, two with locking modification stations. The MOD-S can hold your largest cast without twisting, and all your tools needed for modification. The large table work surface is finished hardwood, and the fully welded steel fixtures and support structure provide years of trouble free service. The MOD-S supports all LI attachments for easy customization.

MOD-S $2,500.00 free shipping in lower 48
X-500

Function

Sturdy Bolt-Down
Modifying Fixture

The X-500 is a durable fixture to hold your biggest or smallest plaster mould alike. The square tube construction with a heavy threaded handle, give you three points of contact for the tightest grip on your project. Powder coated to resist rust and flaws for years, the X-500 is a must for your plaster room.

X-500 $150.00
X-500

Function

The CX-500 is a clamp style modification fixture that bolts to any table or LI work station. The CX-500 is tough enough to hold your largest cast for shaping and sanding, and it also has an extra sleeve to hold a second cast. The CX-500 is made entirely from steel including the welded cam handle.

CX-500 $225.00
DX-500

Function

The DX-500 has a raised neck and a vertical slot for a second mold. The DX-500 has the same great square tube construction with a vise handle as the X-500, but it also has a place to hold a second mold. With a smaller profile on the table the DX-500 is easy to clean and takes up less space. Comes with mounting hardware and a durable powder coat.

DX-500 $200.00

BASES

DX-1000

Function

Dual Purpose LI Base
and Drape Thermoforming Chamber

The DX-1000 has a horizontal tube that is a drape thermoforming chamber, AND an independent vertical tube that is a base for ROTOLAMs and LI bubble thermoforming Platforms. The drape thermoforming chamber has a long neck, threaded T handle, and holes in the end to prevent blocking the vacuum with the cast. The separate vertical tube is a receiving sleeve for Leonard Industries attachments that rotate without losing vacuum giving the technician access to all sides of the project. It features independent valves for each chamber, all steel bolt down body, air-tight welded seams, powder coat finish, and ships to you with all valves, barbs, and mounting hardware.

DX-1000 $350.00
TM-1000

Function

Bolt Down LI Base

The TM-1000 (shown with Upper Extremity 4" Platform) is a receiving sleeve for Leonard Industries rotating attachments that bolts to any table. All steel, airtight, welded construction guarantee performance of the TM-1000. Comes with valve, barb, and mounting hardware.

TM-1000
$135.00
VM-1000

Function

LI Base That Fits
Securely Into Any Shop Vice

The VM-1000 (shown with ROTOLAM) is a receiving sleeve for Leonard Industries rotating attachments that has a blade welded on the bottom to fit into any standard shop vise. Its stores easily and adds another vacuum station without taking up any table space. All seams are welded steel and the VM-1000 comes with powder coat finish, valve, and barb.

VM-1000
$125.00
WB-1000
VB-1000

Function

Free standing adjustable steel workbench with 2
LI platforms and pump table

The WB-1000 is a free standing work bench with table, pump shelf, and double LI platform. The WB-1000 can support any two LI attachments or two vertical alignment jigs. The table provides a large work surface and is adjustable to three different heights to fit any technician. The pump shelf keeps your expensive hardware safely elevated for easy cleaning and ventilation. The structure of the WB-1000 is welded steel with heavy duty diamond plate base, and finished hardwood table. The WB-1000 is the ultimate fabrication table for orthotics and prosthetics, and is fully upgradeable with tons of attachments.

WB-1000
$1,000.00
FS-1000

Function

The FS-1000 is our floor mounted vertical post that can support several LI fixtures capable of fabricating all kinds of orthotic and prosthetic devices. The FS-1000 can be free standing or bolted to any floor. The large base and steel vertical tube provide the ultimate stability. The FS-1000 allows you to adjust your fabrication fixture to three different heights, accommodating any technician. The fixture is free to rotate around the vertical post of the FS-1000 so it can service multiple work areas simultaneously.

FS-1000
$350.00